Lessons Learned from Years with

Tips on How to Change Coolant on Your Car

Once you take a look at your car then it is the one that will need the right fluids to run efficiently. One of the important fluids that your car must have is the antifreeze or coolant. It is this one that will help in preventing your car from overheating. This is needed since to absorbs excess heat in your engine. Always make sure that you will be able to keep this fluid on its normal level.-read more here

It is important to see to it that you are able to change your coolant depending on the mileage that it has. See to it that you are able to change your coolant after 60,000 miles up to 100,000 miles. You also can check the manual of your car to determine when you will have to change your coolant. You need to remember that your coolant should not run low. If the coolant that you have runs low then it is your radiator that might have a leak.

If you plan on doing this on your won then see to it that you will be able to buy a new coolant for your car. It is also important that you will be buying a radiator flush product. It is clearing out your cooling system that you are able to do with this one. There are steps that you will need to follow after securing these things.

Once you are chagrin your coolant then the first thing that you need to do is to mind your safety firs. If you are changing your coolant then make sure that you will not do it while your engine is running. Letting the engine cool off first is a thing that you will need to do before starting the procedure.-read more now

What you need to do next is to remove the radiator cap and locate the drain plug. Placing a pan under the drain plug is a thing that you will need to do to catch the old coolant. Once you are ready, you can now loosen the plug and let the coolant drain into the pan.

The next thing that you will need to do is to fill the cooling system with water. By doing this one then you are able to flush out the reaming coolant.-this product

The next thing that you need to do is to put the radiator cap back on and run the engine for at least 10 minutes. Whenever this is done then water will be able to flow. Turn of the car and let it cool again. You will need to do this process again for at least 3 times.

Putting the radiator flush to the cooling system is the next thing that you need to do. Put the radiator cap and let the engine run again.

Letting the engine cool down is a thing that you will need to do once you are done. Closing the drain plug and pour the coolant into the cooling system is the next thing that you need to do.

Researched here: http://carmaintenance.mystrikingly.com/#what-to-do-when-changing

You Might Also Like